Yamaha Maintenance Schedule
First Service 25 Hour or 3 months:
- Upper engine oil and filter change
- Replace Lower unit gear case oil and drain screw seals.
- Replace inline fuel on engine.
- Change Fuel water separator(s)
- Remove prop grease shaft and inspect seals.
- Grease steering lubrication points
- Preform visual inspection of engine components
- Test run in barrel to confirm cooling properly.
- Take download off engine
Second service 100 hour or 1 year:
- Upper engine oil and filter change
- Replace Lower unit gear case oil and drain screw seals.
- Replace inline fuel on engine.
- Change Fuel water separator(s)
- Remove prop grease shaft and inspect seals.
- Grease steering lubrication points
- Preform visual inspection of engine components
- Test run in barrel to confirm cooling properly.
- Take download off engine
Third service 200 hour or 2 Years:
- Upper engine oil and filter change
- Replace Lower unit gear case oil and drain screw seals.
- Replace inline fuel on engine.
- Change Fuel water separator(s)
- Replace spark plugs
- Remove prop grease shaft and inspect seals.
- Grease steering lubrication points
- Preform visual inspection of engine components
- Test run in barrel to confirm cooling properly.
- Take download off engine
Forth service 300 hour or 3 Years:
- Upper engine oil and filter change
- Replace Lower unit gear case oil and drain screw seals.
- Replace inline fuel on engine.
- Change Fuel water separator(s)
- Replace Water pump and housing
- Replace Thermostat(s) and Gasket
- Remove prop grease shaft and inspect seals.
- Grease steering lubrication points
- Preform visual inspection of engine components
- Test run in barrel to confirm cooling properly.
- Take download off engine
Fifth service 400 hours or 4 years:
- Upper engine oil and filter change
- Replace Lower unit gear case oil and drain screw seals.
- Replace inline fuel on engine.
- Change Fuel water separator(s)
- Replace spark plugs
- Remove prop grease shaft and inspect seals.
- Grease steering lubrication points
- Preform visual inspection of engine components
- Test run in barrel to confirm cooling properly.
- Take download off engine
Sixth service 500 hours or 5 Years:
- Upper engine oil and filter change
- Replace Lower unit gear case oil and drain screw seals.
- Replace inline fuel on engine.
- Change Fuel water separator(s)
- Inspect timing belt replace if needed
- Remove prop grease shaft and inspect seals.
- Grease steering lubrication points
- Preform visual inspection of engine components
- Test run in barrel to confirm cooling properly.
- Take download off engine